15mm Compression at Mr Central Heating

Compression 15mm Straight Coupler

This single brass compression 15mm straight coupler fitting from Evolve is suitable for connecting two lengths of 15mm copper tube on hot or cold systems. It enables a quick system build by simply tightening the nuts over the pipe without the need for any heat or solder.

£0.84 Excl. Tax £1.01 Incl. Tax

V&G Standard 15mm Compression Straight Filling Loop

This braided straight filling loop from Valogin allows you to top up a sealed heating circuit from the mains water supply. It's a necessary accessory for sealed systems and all combination boilers that don't have their own filling loop built in.

£5.81 Excl. Tax £6.97 Incl. Tax

Compression Adaptor 15mm x 1/2" Female Iron Straight

This single brass compression 15mm x 1/2" female iron straight adaptor enables a 1/2" male threaded fitting to be converted to a 15mm compression fitting. Compression fittings dont require any heat or solder; simply tighten the nut onto the pipe for a quick system build.

£0.69 Excl. Tax £0.83 Incl. Tax

Compression 22mm x 15mm Reducing Coupler

This single brass compression 22mm x 15mm reducing coupler from Evolve can be used to easily connect 22mm copper tube to 15mm copper tube on either hot or cold systems. Simply tighten the nuts over the pipe for a quick system build without requiring any heat or solder.

£1.20 Excl. Tax £1.44 Incl. Tax

Compression 15mm 90 Degree Elbow

This single brass compression 15mm 90 elbow fitting from Evolve is ideal for connecting two lengths of 15mm copper tube on either hot or cold systems. Simply tighten the nuts over the pipe for a quick system build without the need for any heat or solder.

£0.91 Excl. Tax £1.09 Incl. Tax

Compression 15mm x 8mm 1 Piece Reducer

This 15mm x 8mm compression 1 piece reducer from Evolve is suitable for use with 15mm compression fittings such as radiator valves, tees, couplers, elbows etc. It works by replacing the olive inside a 15mm compression radiator valve and reducing it down for use with 8mm pipe.

£1.42 Excl. Tax £1.70 Incl. Tax

Compression Adaptor 15mm x 1/2" Male Iron Straight

This single brass compression 15mm x 1/2" male iron straight adaptor allows a 1/2" female threaded fitting to be easily converted to a 15mm compression fitting. Compression fittings dont need any heat or solder; simply tighten the nut onto the pipe for a quick system build.

£0.73 Excl. Tax £0.88 Incl. Tax

V&G Compression 15mm x 1/2" Angled Chrome Service Valve

This angled chrome-plated 15mm x 1/2" compression service valve can be used to temporarily halt the flow of water in order to carry out maintenance or repairs. The valve is operated by a simple quarter turn with a screwdriver.Wras approval number - 1411043

£1.25 Excl. Tax £1.50 Incl. Tax

V&G Compression 15mm Chrome Isolation Valve

This chrome-plated 15mm compression isolation valve from Valogin can be used to temporarily stop the supply of water from a fitting to enable repairs, such as changing a tap, to be carried out without needing to turn off the mains. The isolating valve is activated by a simple quarter turn with a…

£0.70 Excl. Tax £0.84 Incl. Tax

V&G 15mm Compression Stopcock

This 15mm brass compression stopcock from Evolve is suitable for use in isolating the water supply on a 15mm pipe to a domestic or commercial property. The inclusion of compression fittings eliminates the need for any heat or solder; simply tighten the nuts onto the pipe for a quick installation…

£2.92 Excl. Tax £3.50 Incl. Tax

15mm Compression Double Check Valve

This 15mm compression double check valve from Evolve eliminates the risk of contamination from the backflow by only allowing water to flow in one direction. Compression fittings dont need any heat or solder; simply tighten the nuts onto the pipe for a quick system build.

£1.47 Excl. Tax £1.76 Incl. Tax

15mm Compression Rigid Fan Gas Cock

This 15mm compression rigid fan gas cock is made of high quality brass and is suitable for use with domestic gas only. The inclusion of compression fittings allows it to be quickly and tightly connected without needing any heat or solder.

£2.85 Excl. Tax £3.42 Incl. Tax

V&G 15mm Compression Single Check Valve

This 15mm compression single check valve from Evolve only allows water to flow in one direction, thus eliminating the risk of contamination from the backflow. Compression fittings dont require any heat or solder; simply tighten the nuts onto the pipe for a quick installation.Wras approval number -…

£1.03 Excl. Tax £1.24 Incl. Tax

ADEY MagnaScale 15mm Compression Inline Scale Reducer

The harder the water, the more minerals it contains and the more likely limescale is to build up. Designed for properties where water hardness is above 200ppm, MagnaScale protects individual appliances from damage, so that hard water isn’t a problem.MagnaScale can be installed on horizontal…

£21.32 Excl. Tax £25.58 Incl. Tax

ADEY ElectroScale 15mm Compression Inline Scale Reducer

ElectroScale has been designed to prevent limescale build-up in homes and small commercial properties. This product is a non-polluting electrolytic water conditioner. The electrolytic cell alters the crystal structure of the limescale as it passes through, making it less likely to stick to pipes or…

£33.98 Excl. Tax £40.78 Incl. Tax

Compression 15mm Equal Tee

This single brass compression 15mm equal tee joint from Evolve has equal sizes at each end, enabling three lengths of 15mm copper tube to be easily connected. Simply tighten the nuts over the pipe for a quick system build without the need for any heat or solder.

£1.20 Excl. Tax £1.44 Incl. Tax

Compression 15mm Stop End

This single brass compression 15mm push-on stop end from Evolve can be used to cap a 15mm copper tube on either hot or cold systems to prevent leaks or weeping. Simply tighten the nut onto the pipe for a quick system build without needing to use any heat or solder.

£0.50 Excl. Tax £0.60 Incl. Tax

Compression 15mm Tank Connector

This single brass compression 15mm tank connector from Evolve can be used for a wide range of applications on hot or cold systems. Simply tighten the nuts over the pipe for a quick system build without needing to use any heat or solder.

£1.46 Excl. Tax £1.75 Incl. Tax