Evolve 22mm

All Product Results: 1 - 18 item(s)
Related Categories
    • Evolve 22mm Automatic Bypass Valve ABV22

      Evolve 22mm Automatic Bypass Valve ABV22

      A lot of boiler manufacturers demand that the circulation of water through the boiler heat exchangers shouldnt fall below a certain limit, regardless of system load. The Evolve ABV22 auto bypass valve opens and closes according to the system pressure increasing the system efficiency as well as…
      £6.96 Excl. Tax £8.35 Incl. Tax
    • Evolve 22mm Cylinder Flange

      Evolve 22mm Cylinder Flange

      This Evolve 22mm cylinder flange is designed to provide an independent hot water supply, dramatically reducing air surging, noise and temperature variations. Connections are made directly into the hot water supply tank.
      £14.84 Excl. Tax £17.81 Incl. Tax
    • Evolve H+R 22mm Limebuster Inline Scale Reducer

      Evolve H+R 22mm Limebuster Inline Scale Reducer

      The Evolve 22mm limebuster is a market-leading in-line scale reducer for central heating systems, suitable for use with combination boilers. It helps to reduce build-up of scale on the heat exchanger and is supplied with compression couplings.
      £25.00 Excl. Tax £30.00 Incl. Tax
    • Evolve 15 & 22mm Pressure Reducing Valve c/w Gauge

      Evolve 15 & 22mm Pressure Reducing Valve c/w Gauge

      This pressure reducing valve complete with gauge from Evolve is designed for use with potable water and suitable for both 15mm and 22mm connections. Max. inlet working pressure: 16 bar Outlet adjustment range: min. 1 bar, max. 6 bar Max temperature (water): 65C Factory pre-set: 3 bar Pressure gauge…
      £17.30 Excl. Tax £20.76 Incl. Tax
    • Evolve Unvented Cylinder Tundish

      Evolve Unvented Cylinder Tundish

      A replacement tundish for unvented cylinders.22mm compression to 15mm Compression.The body is on a swivel so that it can be turned to a position that can be easily viewed.
      £4.88 Excl. Tax £5.86 Incl. Tax
    • Compression 22mm Stop End

      Compression 22mm Stop End

      This single brass compression 22mm push-on stop end from Evolve can be used to cap a 22mm copper tube on either hot or cold systems to prevent leaks or weeping. Simply tighten the nut onto the pipe for a quick system build without the need for any heat or solder.
      £0.88 Excl. Tax £1.06 Incl. Tax
    • Compression 22mm Straight Coupler

      Compression 22mm Straight Coupler

      This single brass compression 22mm straight coupler fitting from Evolve can be used to connect two lengths of 22mm copper tube on either hot or cold systems. By simply tightening the nuts over the pipe it enables a quick system build without requiring any heat or solder.
      £1.48 Excl. Tax £1.78 Incl. Tax
    • Compression 22mm Equal Tee

      Compression 22mm Equal Tee

      This single brass compression 22mm equal tee joint from Evolve has equal sizes at each end, allowing three lengths of 22mm copper tube to be easily connected. Simply tighten the nuts over the pipe for a quick system build without needing to use any heat or solder.
      £2.06 Excl. Tax £2.47 Incl. Tax
    • Compression 22mm Tank Connector

      Compression 22mm Tank Connector

      This single brass compression 22mm tank connector from Evolve can be used for a wide range of applications on hot or cold systems. Simply tighten the nuts over the pipe for a quick system build without the need for any heat or solder.
      £2.34 Excl. Tax £2.81 Incl. Tax
    • V&G 22mm Compression Stopcock

      V&G 22mm Compression Stopcock

      This 22mm brass compression stopcock from Evolve is suitable for use in isolating the water supply on a 22mm pipe to a domestic or commercial property. The inclusion of compression fittings eliminates the need for any heat or solder; simply tighten the nuts onto the pipe for a quick installation…
      £5.99 Excl. Tax £7.19 Incl. Tax
    • Compression 22mm x 22mm x 15mm Reducing Tee

      Compression 22mm x 22mm x 15mm Reducing Tee

      This single brass compression 22mm x 22mm x 15mm centre reducing tee from Evolve allows two lengths of 22mm copper tube and one of 15mm to be easily connected. Simply tighten the nuts onto the pipe for a quick system build without needing any heat or solder.
      £2.06 Excl. Tax £2.47 Incl. Tax
    • Compression 22mm 90 Degree Elbow

      Compression 22mm 90 Degree Elbow

      This single brass compression 22mm 90 elbow fitting from Evolve can be used to connect two lengths of 22mm copper tube on either a hot or cold system. Simply tighten the nuts over the pipe for a quick system build without needing to use any heat or solder.
      £1.65 Excl. Tax £1.98 Incl. Tax
    • 22mm Compression Double Check Valve

      22mm Compression Double Check Valve

      This 22mm compression double check valve from Evolve eliminates the risk of contamination from the backflow by allowing water to only flow in one direction. Compression fittings dont need any heat or solder; simply tighten the nuts onto the pipe for a quick system build.
      £2.27 Excl. Tax £2.72 Incl. Tax
    • Compression 22mm x 15mm Reducing Coupler

      Compression 22mm x 15mm Reducing Coupler

      This single brass compression 22mm x 15mm reducing coupler from Evolve can be used to easily connect 22mm copper tube to 15mm copper tube on either hot or cold systems. Simply tighten the nuts over the pipe for a quick system build without requiring any heat or solder.
      £1.20 Excl. Tax £1.44 Incl. Tax
    • Compression 28mm x 22mm Reducing Coupler

      Compression 28mm x 22mm Reducing Coupler

      This single brass compression 28mm x 22mm reducing coupler from Evolve allows 28mm copper tube to be easily connected to 22mm copper tube on hot or cold systems. Simply tighten the nuts over the pipe for a quick system build without needing any heat or solder.
      £2.71 Excl. Tax £3.25 Incl. Tax
    • V&G 22mm Compression Single Check Valve

      V&G 22mm Compression Single Check Valve

      This 22mm compression single check valve from Evolve allows water to only flow in one direction, thus eliminating the risk of contamination from the backflow. Compression fittings dont require any heat or solder; simply tighten the nuts onto the pipe for a quick installation.Wras approval number -…
      £2.19 Excl. Tax £2.63 Incl. Tax
    • BiWorld 22mm 2 Port Motorised Zone Valve

      BiWorld 22mm 2 Port Motorised Zone Valve

      The BiWorld series of motorized valves are used to control flow in chilled or hot water systems. Although specifically designed for small bore central heating systems.Valve SpecificationsRemovable Actuator HeadMedium - chilled or hot waterFlow Direction - as per arrow on valve bodySupply Voltage -…
      £23.37 Excl. Tax £28.04 Incl. Tax
    • V&G 25mm x 22mm Compression Stopcock (Poly x Copper)

      V&G 25mm x 22mm Compression Stopcock (Poly x Copper)

      This 25mm x 22mm brass compression stopcock (poly x copper) from Evolve is suitable for isolating a property's water supply on pipe that reduces from 25mm to 22mm. The inclusion of compression fittings eliminates the need for heat or solder; simply tighten the nuts onto the pipe for a quick…
      £6.70 Excl. Tax £8.04 Incl. Tax
    }